 |  | Mid-woofers |  |
| ALL Raw Drivers | |
| ALL Product Information | |
| Info Center | |
| Company Review | |
| |
| Wavecor WF168WA01-01 (ea.) | |
|
6½", stamped steel, round, Ø90 mm ferrite, 1¼" VC, 4 Ohm
|
 | Wavecor WF168WA01-01 (ea.) midbass driver's product information |  |
|
Nominal impedance is 4 ohm for WF168WA01 and 8 ohm for WF168WA02. Otherwise the two models are identical.
WF168WA01/02 are mid/woofers designed for demanding bass and midrange applications. It works equally well for high-end hi-fi, high quality home theater systems, and top multimedia setups.
Powered by a large 90mm magnet structure that ensures good efficiency and optimal T/S parameters.
The large 32mm voice coil ensures high power handling - thermally and mechanically
The optimized paper cone ensures large bandwidth and low distortion. Distortion is further reduced by efficient venting and an alu shorting ring stabilizing the magnetic field in the air gap.
WF168WA01/02 are very good choices for compact 2- way speaker systems.
Features
- Alu field-stabilizing ring inside magnet assembly for reduced high-level distortion
- Vented voice coil former for reduced distortion and compression
- New vented chassis for lower air flow speed reducing audible distortion
- Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor system with 1¼" voice coil diameter and 90mm magnet for better control and efficiency
- Black magnet parts for better heat transfer to increase power handling
- Long linear stroke motor for reduced distortion at high levels
- Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
- Gold plated terminals to prevent oxidation for long-term reliable connection
|
| Wavecor WF168WA01-01 (ea.) midbass driver's specifications | |
| Nominal size | 6½ inch. |
| Nominal impedance | 4 ohm |
| Recommended upper frequency limit | 3 kHz |
| Recommended cabinet volume | 15 - 20 lit. |
| Sensitivity, 2.83V/1m, (average 500-5,000Hz) | 91.5 dB |
| Voice coil diameter | 32.5 mm |
| Voice coil height | 11 mm |
| Air gap height | 5 mm |
| Voice coil resistance, RDC | 3.2 ohm |
| Voice coil inductance | 0.20 mH |
| Magnet weight | 400 g |
| Effective radiating area, Sd | 139 sq.cm |
| Power handling, continuous, IEC 268-5 | 60 W |
| Resonance freq., Fs | 47.5 Hz |
| Moving mass, incl. air, free air | 12.5 g |
| Force factor, Bxl | 5.2 Tm |
| Mechanical Q, Qm | 7.7 |
| Electrical Q, Qe | 0.44 |
| Total Q, Qt | 0.42 |
| Suspension compliance, Cms | 0.90 mm/N |
| Equiv. air volume, Vas | 25 lit. |
| Total unit net weight | 1.03 kg |
See a collection of driver data and measurements in electronic formats. |
| Wavecor WF168WA01-01 (ea.) Midbass Driver additional photos | |
| More information about Wavecor WF168WA01-01 (ea.) Midbass | |
| | | Recommended | | | with this product we recomend: |
| | |
