 |  | Mid-woofers |  |
| ALL Raw Drivers | |
| ALL Product Information | |
| Info Center | |
| Company Review | |
| |
| Wavecor WF160WA01-01 (ea.) | |
|
6¼", stamped steel, dual neodymium, heat sink, 1¼" VC, 4 Ohm
|
 | Wavecor WF160WA01-01 (ea.) midbass driver's product information |  |
|
WF160WA01 is a mid/woofer designed for demanding bass and midrange applications. It works equally well for high-end hi-fi, high quality home theater systems, and top multimedia setups.
It is powered by a dual neodymium magnet structure that ensures good efficiency and suitable T/S parameters, and at the same time offers extremely good magnetical shielding.
The large 32mm voice coil and the special heat sink ensure high power handling - thermally and mechanically
The optimized paper cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting of chassis and voice coil.
WF160WA01 is an excellent choice for 2-way speaker systems.
Features
- Heat sink for increased heat transfer obtaining high long-term power handling
- Vented voice coil former for reduced distortion and compression
- Vented chassis for lower air flow speed reducing audible distortion
- Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor system with 1¼” voice coil diameter and dual neodymium magnet for better control and efficiency
- Dual neodymium magnet structure for almost ideal magnetical shielding
- Long linear stroke motor for reduced distortion at high levels
- Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
- Gold plated terminals to prevent oxidation for long-term reliable connection
|
| Wavecor WF160WA01-01 (ea.) midbass driver's specifications | |
| Nominal size | 6¼ inch. |
| Nominal impedance | 4 ohm |
| Recommended upper frequency limit | 3 kHz |
| Recommended cabinet volume | 15 - 20 lit. |
| Sensitivity, 2.83V/1m, (average 500-5,000Hz) | 91.5 dB |
| Voice coil diameter | 32.5 mm |
| Voice coil height | 11 mm |
| Air gap height | 4 mm |
| Voice coil resistance, RDC | 3.2 ohm |
| Voice coil inductance | 0.16 mH |
| Magnet weight (dual neodymium) | 102 g |
| Effective radiating area, Sd | 139 sq.cm |
| Power handling, continuous, IEC 268-5 | 60 W |
| Resonance freq., Fs | 53 Hz |
| Moving mass, incl. air, free air | 12.5 g |
| Force factor, Bxl | 5.4 Tm |
| Mechanical Q, Qm | 9 |
| Electrical Q, Qe | 0.45 |
| Total Q, Qt | 0.43 |
| Suspension compliance, Cms | 0.73 mm/N |
| Equiv. air volume, Vas | 20 lit. |
| Total unit net weight | 0.064 kg |
See a collection of driver data and measurements in electronic formats. |
| Wavecor WF160WA01-01 (ea.) Midbass Driver additional photos | |
| More information about Wavecor WF160WA01-01 (ea.) Midbass | |
| | | Recommended | | | with this product we recomend: |
| | |
