 |  | Mid-woofers |  |
| ALL Raw Drivers | |
| ALL Product Information | |
| Info Center | |
| Company Review | |
| |
| Wavecor WF110WA02-01 (ea.) | |
|
4½", stamped steel, ø85 mm ferrite, 1¼" VC, 4 Ohm
|
 | Wavecor WF110WA02-01 (ea.) midbass driver's product information |  |
|
WF110WA02 is a mid/woofer designed for demanding bass and midrange applications. It works equally well for high-end hi-fi, high quality home theater systems, and top multimedia setups.
It is powered by a large 85mm magnet structure that ensures good efficiency and optimal T/S parameters.
The large 32mm voice coil ensures high power handling - thermally and mechanically
The optimized paper cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting and an alu stabilizing ring.
WF110WA02 is a good choice for very compact 2-way speaker systems.
Features
- Built-in alu field-stabilizing ring for reduced high-level distortion
- Vented voice coil former for reduced distortion and compression
- Vented chassis for lower air flow speed reducing audible distortion
- Voice coil wound with Copper Clad Aluminium Wire for higher effeciency and better dynamics
- Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor system with 1¼" voice coil diameter and 85mm magnet for better control and efficiency
- Black magnet parts for better heat transfer to increase power handlling
- Long linear stroke motor for reduced distortion at high levels
- Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
- Gold plated terminals to prevent oxidation for long-term reliable connection
|
| Wavecor WF110WA02-01 (ea.) midbass driver's specifications | |
| Nominal size | 4½ inch. |
| Nominal impedance | 4 ohm |
| Recommended upper frequency limit | 4 kHz |
| Recommended cabinet volume | 2-4 lit. |
| Sensitivity, 2.83V/1m, (average 500-5,000Hz) | 88.5 dB |
| Voice coil diameter | 32.5 mm |
| Voice coil height | 11 mm |
| Air gap height | 5.0 mm |
| Voice coil resistance, RDC | 3.2 ohm |
| Voice coil inductance | 0.13 mH |
| Magnet weight | 325 g |
| Effective radiating area, Sd | 55 sq.cm |
| Power handling, continuous, IEC 268-5 | 50 W |
| Resonance freq., Fs | 76 Hz |
| Moving mass, incl. air, free air | 6.2 g |
| Force factor, Bxl | 4.6 Tm |
| Mechanical Q, Qm | 8.5 |
| Electrical Q, Qe | 0.45 |
| Total Q, Qt | 0.43 |
| Suspension compliance, Cms | 0.70 mm/N |
| Equiv. air volume, Vas | 3.0 lit. |
| Total unit net weight | 0.95 kg |
See a collection of driver data and measurements in electronic formats. |
| Wavecor WF110WA02-01 (ea.) Midbass Driver additional photos | |
| More information about Wavecor WF110WA02-01 (ea.) Midbass | |
| | | Recommended | | | with this product we recomend: |
| | |
