WBT 0645 White (ea.)

An Innovative banana plug approved worldwide as a loudspeaker cable connector due to the safety pin design. It is fully insulated using Makrolon. A secure connection is possible through an expanding inner spike which provides high clamping power. While using only one hand, cables can be connected in tight spaces with just thumb and forefinger. Extremely compact, sloping angle is easy on cable and equipment. The WBT-0645 is stackable for bi-wiring. Two Torx screws for extra tight pressure connection and additional cable strain relief. Connector can accommodate a cable diameter size of 10mm² / 8 AWG.

• Locking banana plug
• CE- and IEC compliant
• Suitable for bi-wiring
• Crimping with WBT double Torx screw system
• Compact
• 24 carat gold-plating

Angled Banana Plug Midline, with Safety Pin.

A banana plug of the extra class. The WBT-0645 is approved worldwide as a loudspeaker connector due to the Safety Pin construction first developed by WBT. It is fully insulated and exerts a high clamping force by means of the expandable centre spike which can be activated by screwing the spindle inwards. In this way a firm fixing of the plug and a continually high contact pressure are guaranteed. The clamping force and high copper content of the alloy give the WBT-0645 a high conductivity and precise signal transmission.

Angled banana plug with WBT Midline quality. A robust construction from a copper alloy and 24 carat gold-plating mean that any oxidation which could influence signal transmission is impossible. Despite the sloped angle, the WBT-0645 is fabricated from one piece so that any unnecessary transition resistance is avoided.

The special plus: thanks to the sloped angle, the WBT-0645 is extremely compact and simultaneously cable friendly since the slope of the cable leads to the ground without kinking. The WBT-0645 is stackable for bi-wiring if required. The back of the spindle is designed so that a further WBT-0645 can be inserted into it. The WBT-0645 can be easily operated by hand.

The WBT-0645 is designed for the crimp connection technique. The two designated Torx screws (T.6) provide, with their special fine thread, for a durable connection of the crimped cable end, as well as a reliable strain relief.

If using the crimping connection with your WBT-0645 it can be used time and again since the valuable protective surface of the plug will not be damaged by soldering.

See instruction manual

Recommended with this product: WBT 9126 8.5 mm