 |  | Mid-woofers |  |
| ALL Raw Drivers | |
| ALL Product Information | |
| Info Center | |
| Company Review | |
| |
| Wavecor WF166TU02-01 (ea.) | |
|
6½", die cast, 90mm ferrite, 1¼" VC, 4 ohm, individual packaging
|
 | Wavecor WF166TU02-01 (ea.) car midwoofer's product information |  |
|
WF166TU02 is a mid/woofer designed for demanding bass and midrange applications. It works equally well for most applications but is designed especially for automotive high-end sound. The very rigid die cast alu chassis follows the common standard dimensions for easy installation in cars
WF166TU02 is powered by a large 90 mm magnet structure that ensures good efficiency and optimized T/S parameters.
The large 32 mm voice coil ensures high power handling - thermally and mechanically The optimized paper cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting and a separate alu field-stabilizing ring.
WF166TU02 is a good choice for 2-way car speaker systems.
Features
- Very rigid die cast alu chassis
- Built-in alu field stabilizing ring for reduced high-level distortion
- Vented voice coil former for reduced distortion and compression
- Vented chassis for lower air flow speed reducing audible distortion
- Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor system with 1¼” voice coil diameter and large 90 mm magnet for better control and efficiency
- Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
- Gold plated terminals to prevent oxidation for long-term reliable connection - important in a car environment
|
| Wavecor WF166TU02-01 (ea.) car midwoofer's specifications | |
| Nominal size | 6½ [inch.] |
| Nominal impedance | 4 [ohm] |
| Recommended max. upper frequency limit | 3.5 [kHz] |
| Sensitivity, 2.83V/1m (average SPL in range 400 - 1,000 Hz) | 91 [dB] |
| Power handling, continuous, IEC 268-5, no additional filtering | 60 [W] |
| Effective radiating area, Sd | 139 [sq.cm] |
| Resonance frequency (free air, no baffle), Fs | 50 [Hz] |
| Moving mass, incl. air (free air, no baffle), Mms | 12.5 [g] |
| Force factor, Bxl | 5.0 |
| Suspension compliance, Cms | 0.81 [mm/N] |
| Equivalent air volume, Vas | 22.3 [lit.] |
| Mechanical Q, Qms | 9.8 |
| Electrical Q, Qes | 0.50 |
| Total Q, Qts | 0.48 |
| Voice coil resistance, RDC | 3.2 [ohm] |
| Voice coil inductance, Le (measured at 10 kHz) | 0.23 [mH] |
| Voice coil inside diameter | 32 [mm] |
| Voice coil winding height | 11 [mm] |
| Air gap height | 5 [mm] |
| Magnet weight | 400 [g] |
| Total unit net weight excl. packaging | 1.15 [kg] |
|
| Wavecor WF166TU02-01 (ea.) Car Midwoofer additional photos | |
| More information about Wavecor WF166TU02-01 (ea.) Car Midwoofer | |
| |
| | |
