 |  | Mid-woofers |  |
| ALL Raw Drivers | |
| ALL Product Information | |
| Info Center | |
| Company Review | |
| |
| Wavecor WF132TU02-01 (ea.) | |
|
5¼", die cast, 90mm ferrite, 1¼" VC, 4 ohm, individual packaging
|
 | Wavecor WF132TU02-01 (ea.) car midwoofer's product information |  |
|
WF132TU02 is a mid/woofer designed for demanding bass and midrange applications. It works equally well for most applications but was designed especially for automotive high-end sound systems. The very rigid die cast alu chassis follows the common standard dimensions for easy installation in cars.
WF132TU02 is powered by a large 90mm magnet structure that ensures good efficiency and optimized T/S parameters.
The large 32mm voice coil and the size of the magnet ensure high power handling - thermally and mechanically. The optimized paper cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting of chassis and voice coil.
WF132TU02 is an obvious choice for 2-way car speaker systems.
Features
- Very rigid die cast alu chassis to withstand challenging car applications
- Built-in alu field-stabilizing ring for reduced high-level distortion
- Vented voice coil former for reduced distortion and compression
- Vented chassis for lower air flow speed reducing audible distortion
- Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
- Large motor system with 1¼” voice coil diameter and large 90 mm magnet for better control, power handling, and efficiency
- Linear suspension with specially designed Conex damper (spider) for long durability under extreme operating conditions
- Gold plated terminals to prevent oxidation for long-term reliable connection - important in a car environment
|
| Wavecor WF132TU02-01 (ea.) car midwoofer's specifications | |
| Nominal size | 5¼ [inch.] |
| Nominal impedance | 4 [ohm] |
| Recommended max. upper frequency limit | 4 [kHz] |
| Sensitivity, 2.83V/1m (average SPL in range 400 - 1,000 Hz) | 89.5 [dB] |
| Power handling, continuous, IEC 268-5, no additional filtering | 55 [W] |
| Effective radiating area, Sd | 95 [sq.cm] |
| Resonance frequency (free air, no baffle), Fs | 62 [Hz] |
| Moving mass, incl. air (free air, no baffle), Mms | 10 [g] |
| Force factor, Bxl | 5.2 |
| Suspension compliance, Cms | 0.66 [mm/N] |
| Equivalent air volume, Vas | 9.0 [lit.] |
| Mechanical Q, Qms | 8 |
| Electrical Q, Qes | 0.46 |
| Total Q, Qts | 0.44 |
| Voice coil resistance, RDC | 3.2 [ohm] |
| Voice coil inductance, Le (measured at 10 kHz) | 0.23 [mH] |
| Voice coil inside diameter | 32 [mm] |
| Voice coil winding height | 11 [mm] |
| Air gap height | 5 [mm] |
| Magnet weight | 400 [g] |
| Total unit net weight excl. packaging | 1.08 [kg] |
|
| Wavecor WF132TU02-01 (ea.) Car Midwoofer additional photos | |
| More information about Wavecor WF132TU02-01 (ea.) Car Midwoofer | |
| |
| | |
