Wavecor TW030WA08-01

Reference: 8235
30 mm, ø80 mm ferrite, silk dome, quadruple-chamber, ferro fluid, 8 Ohm
€79.00 / ea, incl. VAT

Wavecor drivers are built for High Resolution Playback, which means that Fine Details and Textures are reproduced without loss and that Dynamics are preserved without compression. The resulting characteristics are precise presentation of Space and Acoustics Of Recording Venue, unheard Transparency, and sharp and precise Focus.

You will not discover all of the main qualities of Wavecor drivers by measuring only but you most certainly will when you start listening.

Product information

These four tweeter models use same basic design but differ as follows:

  • TW030WA05: 4 ohm, no ferro fluid
  • TW030WA06: 4 ohm, with ferro fluid
  • TW030WA07: 8 ohm, no ferro fluid
  • TW030WA08: 8 ohm, with ferro fluid

Real high-end tweeter design with extremely low resonance frequency and distortion.

Thanks to the extensive internal venting between three internal cavities no air inside is trapped. The result is clearly audible as unheard-of undistorted sound. This feature extends the usable frequency range downwards to an extend very rarely found for any tweeter.

Combined with high power handling this tweeter is the natural candidate for high-end 2-way speaker systems.

Features
  • Precision-coated textile diaphragm for improved consistency and high-frequency extension
  • Extreme internal venting through pole, voice coil former, and top plate to 3 internal chambers
  • Copper-clad aluminium voice coil wire offering lower moving mass for improved efficiency and transient response
  • Reflection-free rear chamber design with solid reinforcement ribs
  • Large ferrite magnet for improved efficiency and transient response
  • With or without high-stability light ferro fluid
  • Flexible lead wires for higher power handling and larger excursion
  • Black anodized magnet structure for increased power handling and reduced power compression
  • Gold plated terminals to prevent oxidation for long-term reliable connection
  • Delivered with EVA gasket attached for hassle-free mounting and secure cabinet sealing
Specifications
Nominal size30 mm
Nominal impedance8 Ohm
Recommended frequency range1500 - 25000 Hz
Sensitivity (2.83V/1m)89 dB
Voice coil diameter30.4
Voice coil height1.7 mm
Air gap height2.5 mm
Voice coil resistance6.3 Ohm
Voice coil inductance28 μH
Magnet weight260 g
Effective Piston Area11.5 cm2
Power handling, continuous60 W
Resonance frequency470 Hz
Moving mass0.39 g
Force factor2.4 N/A
QMS1.3
QES1.25
QTS0.64
Suspension Compliance0.30 mm/N
VAS0.056 Litres
Total net weight0.59 kg
Krm64 μohm
Erm0.92
Kxm4.3 mH
Exm0.56


See a collection of driver data and measurements in electronic formats.