Wavecor WF168WA01-01

Reference: 8251
6½", stamped steel, round, Ø90 mm ferrite, 1¼" VC, 4 Ohm
€66.00 / ea, incl. VAT

Wavecor drivers are built for High Resolution Playback, which means that Fine Details and Textures are reproduced without loss and that Dynamics are preserved without compression. The resulting characteristics are precise presentation of Space and Acoustics Of Recording Venue, unheard Transparency, and sharp and precise Focus.

You will not discover all of the main qualities of Wavecor drivers by measuring only but you most certainly will when you start listening.

Description

Nominal impedance is 4 ohm for WF168WA01 and 8 ohm for WF168WA02. Otherwise the two models are identical.

WF168WA01/02 are mid/woofers designed for demanding bass and midrange applications. It works equally well for high-end hi-fi, high quality home theater systems, and top multimedia setups.

Powered by a large 90mm magnet structure that ensures good efficiency and optimal T/S parameters. The large 32mm voice coil ensures high power handling - thermally and mechanically

The optimized paper cone ensures large bandwidth and low distortion. Distortion is further reduced by efficient venting and an alu shorting ring stabilizing the magnetic field in the air gap.

WF168WA01/02 are very good choices for compact 2- way speaker systems.

Features
  • Alu field-stabilizing ring inside magnet assembly for reduced high-level distortion
  • Vented voice coil former for reduced distortion and compression
  • New vented chassis for lower air flow speed reducing audible distortion
  • Heavy-duty black fiber glass voice coil bobbin to increase power handling and reduce mechanical losses resulting in better dynamic performance and low-level details
  • Large motor system with 1¼" voice coil diameter and 90mm magnet for better control and efficiency
  • Black magnet parts for better heat transfer to increase power handling
  • Long linear stroke motor for reduced distortion at high levels
  • Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
  • Gold plated terminals to prevent oxidation for long-term reliable connection
Specifications
Nominal size6½ inch.
Nominal impedance4 ohm
Recommended upper frequency limit3 kHz
Recommended cabinet volume15 - 20 lit.
Sensitivity, 2.83V/1m, (average 500-5,000Hz)91.5 dB
Voice coil diameter32.5 mm
Voice coil height11 mm
Air gap height5 mm
Voice coil resistance, RDC3.2 ohm
Voice coil inductance0.20 mH
Magnet weight400 g
Effective radiating area, Sd139 sq.cm
Power handling, continuous, IEC 268-560 W
Resonance freq., Fs47.5 Hz
Moving mass, incl. air, free air12.5 g
Force factor, Bxl5.2 Tm
Mechanical Q, Qm7.7
Electrical Q, Qe0.44
Total Q, Qt0.42
Suspension compliance, Cms0.90 mm/N
Equiv. air volume, Vas25 lit.
Total unit net weight1.03 kg


See a collection of driver data and measurements in electronic formats.